Commercial Roofing in Mobile and Baldwin County, AL
Wise Builders installs, repairs, and maintains commercial roofs across Mobile and Baldwin County: PVC, TPO, metal, coatings, and flat roofs on offices, retail centers, metal buildings, churches, and apartments.
We are a licensed general contractor and a Duro-Last approved contractor. You get one project manager, one written scope, one fixed price, and No-Dollar-Limit manufacturer warranties up to 30 years.
Call (251) 305-7282 for a free roof inspection.
★★★★★ 5.0 on Google · 160+ verified reviews · Alabama GC License #60291 · Licensed, bonded & insured
Commercial Roofing Systems We Install and Service
Most low-slope roofs in Mobile and Baldwin County are single-ply, metal, or an older built-up or mod-bit roof. We install, repair, restore, and maintain all of them. Building in Foley, Gulf Shores, or Orange Beach? See commercial roofing in Foley and Baldwin County.
PVC Roofing
Duro-Last PVC, factory-made flashings, and No-Dollar-Limit warranties up to 30 years.
See PVC roofingTPO Roofing
60 and 80 mil TPO, mechanically attached or fully adhered, over insulation sized for your building.
See TPO roofingCommercial Metal Roofs
Retrofits over rusted metal, new R-panel and standing seam, and metal roof coatings.
See commercial metal roofsRoof Coatings
Silicone and acrylic restoration for metal, single-ply, and mod-bit roofs that are still dry underneath.
See roof coatingsFlat Roofs
Ponding, leaks, and worn-out flat roofs: repair, coat, recover, or replace.
See flat roofsSpray Foam Roof Restoration
Silicone recoats and repairs for existing foam roofs, and replacement when the foam is done.
See spray foam roof restorationReplacement, Repair and Maintenance
Every system above gets the same three services.
Roof Replacement
Tear-off, recover, or retrofit, with core cuts before we price and a fixed number in writing.
See roof replacementRoof Repair
Leak tracing and repair on TPO, PVC, metal, mod-bit, and built-up roofs. 24/7 emergency calls.
See roof repairMaintenance Plans
Scheduled inspections, drains cleared, small repairs, and a photo report after every visit.
See maintenance plansBuildings We Roof
Small and mid-size commercial buildings across Mobile and Baldwin County.
- Offices, retail centers, and strip centers.
- Metal shops, warehouses, and pre-engineered metal buildings.
- Churches: sanctuaries, fellowship halls, and education wings.
- Apartments, condos, and HOAs.
- Restaurants, clinics, schools, and nonprofit buildings.
What Every Proposal Includes
No vague square-foot quote. You see what you are buying.
- Core cut results and moisture readings from your roof.
- Every layer: insulation, cover board, membrane or panel, and thickness.
- Fastening pattern and edge metal sized to your address.
- Unit prices for hidden deck, purlin, or wet-insulation repair.
- The warranty term, in writing, with a sample warranty attached.
What a Commercial Roof Costs on the Gulf Coast
A commercial roof price depends on what is under the membrane more than the membrane itself. Here is what each option typically costs, and what moves the number.
Typical Gulf Coast Cost Ranges
Typical Gulf Coast ranges for a 10,000 square foot low-slope roof. Your inspection replaces these with one fixed price.
| System | Cost per Sq Ft | 10,000 Sq Ft Roof | On-Site Time |
|---|---|---|---|
| Silicone coating restorationponding areas, single-ply or mod-bit | $3.50 to $6.00 | $35,000 to $60,000 | 4 to 7 working days |
| Single-ply recover over a dry existing roofTPO or PVC with cover board | $8.00 to $11.00 | $80,000 to $110,000 | 1 to 2 weeks |
| PVC or TPO retrofit over a metal roofflute fill, insulation board, new membrane, edge metal | $6.00 to $8.00 | $60,000 to $80,000 | 2 to 3 weeks |
| TPO tear-off and replace60 mil, code insulation, new edge metal | $13.00 to $16.00 | $130,000 to $160,000 | 2 to 3 weeks |
| PVC tear-off and replace50 to 60 mil, code insulation, new edge metal | $13.00 to $16.00 | $130,000 to $160,000 | 2 to 3 weeks |
| R-panel metal roof replacementpainted steel, with insulation | $11.00 to $13.00 | $110,000 to $130,000 | 2 to 3 weeks |
| Standing seam steel roofPVDF finish | $15.00 to $22.00 | $150,000 to $220,000 | 3 to 4 weeks |
The cheapest roof is the one you do not have to tear off. If core cuts show the existing roof and insulation are dry, a coating or a recover costs well under a tear-off: $3.50 to $6.00 per square foot for a coating or $8.00 to $11.00 for a recover, against $13.00 to $16.00 for a full tear-off with new insulation. If the insulation is wet, it has to come out.
What Moves a Commercial Roof Price
Two roofs the same size can be priced tens of thousands of dollars apart. These are the reasons, and we put each one in writing.
Tear-Off and Wet Insulation
A full tear-off with new insulation runs $13.00 to $16.00 per square foot, against $8.00 to $11.00 for a recover. Older Mobile buildings often have two layers, and wet insulation found in core cuts has to be replaced. We cut cores before we price.
Wind Design at the Edges
The corners and perimeter of a roof take the most wind. They get more fasteners or adhesive and heavier edge metal, sized to the design wind speed for your address.
Penetrations, Curbs and Gutters
Every HVAC curb, skylight, vent, and drain is a detail that has to be flashed. Gutters, downspouts, and new edge metal are often half the line items on a metal building.
Ranges are installed costs for a simple 10,000 square foot low-slope roof. Deck, purlin, and wet-insulation replacement, HVAC curb work, and permits are priced after we inspect the roof.
"Jim Brock is the best project manager ever! He constantly communicated with me about the materials, build and timeline. No stones were unturned! Exceptional work by his team."
Marcus Mitchell, Google review, November 2023
From Inspection to Warranty
Every commercial roof runs through one contract and one project manager. You make the decisions. We carry the crew, the permit, the inspections, and the warranty paperwork.
Step 1. Roof Inspection and Core Cuts
We walk the roof and check the membrane or panels, seams, flashings, curbs, drains, gutters, and edge metal. We cut cores to see the layers and test the insulation for moisture, and we look at the deck or purlins from inside when we can.
Step 2. Options and a Fixed Price
You get a written proposal with every layer, thickness, fastening pattern, and warranty term listed, plus a fixed price. When repair, coating, recover, and replacement are all real options, we price them side by side.
Step 3. Wind Design and Permit
We size the fastening, perimeter and corner enhancement, and edge metal to the design wind speed for your address, then pull the permit with the city or county that has your building.
Step 4. Schedule Around Your Business
We plan the work around your hours. On occupied buildings we work in sections, protect HVAC intakes, and dry in every section before the crew leaves. Your doors stay open.
Step 5. Install With Daily Updates
Your project manager is on the roof with the crew and sends progress photos. Hidden damage, like rusted purlins or wet insulation, is priced at the unit price in your proposal and approved by you before we fix it.
Step 6. Inspection, Warranty and Closeout
The manufacturer inspects the finished roof before it issues the warranty. You get the warranty, the final inspection, lien waivers, and a photo record of the roof, start to finish.
"Great people, great work and great experience. Great communication by William Fields. Work was done on schedule and exactly as stated. I will use these guys again!"
Mark Davidson, Google review, January 2026
Two Metal Roofs, Retrofit With PVC
Both buildings had metal roofs at the end of their life. Instead of tearing off the metal, we retrofit both with Duro-Last PVC over new insulation, with new edge metal and gutters. In Foley we tore off a gravel roof and put Duro-Last PVC on a downtown restaurant: see the Foley Brunch and Supper Club roof. In Mobile, a tear-off exposed a rusted-through steel deck: see the roof and deck replacement.
The Homestead Mobile, Theodore, AL
| Project detail | What we built |
|---|---|
| Building | Two-story metal building, about 11,800 square feet of roof |
| Scope | PVC retrofit over the existing metal roof, no tear-off |
| System | Duro-Last Duro-Tuff 50 mil white PVC over EPS flute fill and 1.5-inch polyiso board, retrofit over the existing metal |
| Attachment | Rhinobond induction-welded plates: 12 per board in the field, 16 at the perimeter, 18 in the corners. No screws through the membrane |
| Edges and water | 290 feet of new wood nailer at the eaves, 300 feet of 6-inch gutters tied into the roof, 170 feet of two-piece compression edge metal |
| Warranty | 20-year Duro-Last No-Dollar-Limit warranty plus our 5-year workmanship warranty |
| Completed | August 2026 |



Mobile SPCA, Mobile, AL
| Project detail | What we built |
|---|---|
| Building | Animal shelter with a standing seam metal roof, about 7,400 square feet |
| Condition | Rusted standing seam panels, 14 skylights, and deteriorated steel purlins in the worst areas |
| Structure | Steel purlin repair: reinforcement plates fabricated and welded overhead from a lift |
| System | Duro-Tuff 50 mil white PVC, mechanically attached with reinforced perimeter detailing, over flute fill sized to the standing seam profile and 1.5-inch polyiso board |
| Details | 14 skylight curbs rebuilt, 442 feet of new edge and rake metal, 360 feet of eave nailer, new gutters and downspouts |
| Warranty | 20-year Duro-Last No-Dollar-Limit warranty |
| Completed | 2026 |



On a metal building, the steel under the roof matters as much as the roof. We inspect from underneath and price structural repair as its own line item, so the number you sign is the number you pay.
Why Building Owners and Property Managers Hire Us
One Contractor, Roof and Building
We are a licensed general contractor, not only a roofer. When a leak has ruined ceilings, drywall, or insulation, the same crew and the same project manager fix the inside too.
One Fixed Price, in Writing
The proposal lists the system, every layer, the warranty term, and unit prices for hidden damage. The price changes only through a written change order you sign first.
Built for Small and Mid-Size Buildings
Offices, retail centers, churches, metal shops, and apartments are our focus. Your roof gets a dedicated project manager, not the crew left over from a warehouse job.
The Credentials Behind Every Commercial Roof
Wise Builders holds Alabama General Contractor License #60291 and is a Duro-Last approved contractor, which lets us offer manufacturer No-Dollar-Limit warranties up to 30 years, depending on the system. Every commercial roof also carries our 5-year workmanship warranty. We carry general liability and workers' compensation and are BBB accredited.
Before you sign with anyone, ask for the license number, a certificate of insurance, and a sample of the warranty you will actually receive. A No-Dollar-Limit warranty covers labor and materials for leaks. A materials-only warranty does not. We send ours with the proposal.
"The contract was clear and all work was performed on schedule. A certificate of compliance was issued by a third party after inspection. It is refreshing to find a company like this."
Ronald Houle, Google review, March 2024
Frequently Asked Questions About Commercial Roofing
How much does a commercial roof cost per square foot in Mobile?
On the Gulf Coast, a commercial roof typically runs $3.50 to $22 per square foot. A silicone coating runs $3.50 to $6.00, a single-ply recover $8.00 to $11.00, a PVC or TPO retrofit over metal $6.00 to $8.00, a full TPO or PVC tear-off $13.00 to $16.00, and a standing seam steel roof $15 to $22. For a 10,000 square foot roof, that is roughly $35,000 to $220,000.
What is the best commercial roof for the Gulf Coast?
For most low-slope buildings here, a white PVC or TPO membrane over new insulation is the best value. It reflects heat, handles ponding better than coatings, and carries long manufacturer warranties. PVC is the better pick for restaurants and for retrofits over metal; standing seam metal is the long-life choice on steeper roofs.
TPO, PVC, or metal: which should I choose?
TPO is the lower-cost single-ply. PVC costs a little more and resists grease, chemicals, and fire better, with factory-made flashings. Metal lasts longest but costs the most up front. See our TPO, PVC, and metal roofing pages for side-by-side detail.
How long does a commercial roof last?
A well-installed PVC or TPO roof typically lasts 20 to 30 years, a silicone coating 10 to 20 years before a recoat, and a standing seam metal roof 40 years or more. Twice-a-year maintenance is what gets a roof to the long end of those ranges.
Do you offer No-Dollar-Limit warranties?
Yes. As a Duro-Last approved contractor we offer manufacturer No-Dollar-Limit warranties up to 30 years, depending on the system, plus our own 5-year workmanship warranty. A No-Dollar-Limit warranty covers labor and materials for leaks, not just the membrane.
Can you re-roof while our building is open?
Yes. Most of our commercial roofs are on occupied buildings. We work in sections, dry in each section every day, protect HVAC intakes, and schedule noisy work around your hours.
Church, Apartment and Commercial Interiors
One licensed general contractor for the roof and the space under it.
Church Roofing
Sanctuaries, fellowship halls, and education wings, scheduled around services and budgets.
See church roofingApartment & Multifamily Roofing
Apartments, condos, and HOAs, phased by building with notices for residents.
See apartment & multifamily roofingWhite Box Build-Outs
Landlord-side vanilla shell: demising walls, ceiling grid, lighting, HVAC, and an ADA restroom, ready to lease.
See white box build-outsOffice Build-Outs
Private offices, conference rooms, break rooms, and cabling for professional tenants.
See office build-outsRetail Build-Outs
Storefront, sales floor, fitting rooms, and lighting for retail and entertainment tenants.
See retail build-outsTenant Improvements & Retrofits
Smaller remodels and second-generation refreshes: paint, flooring, ceilings, partitions, and trim.
See tenant improvements & retrofitsReady for a Roof That Stops Leaking?
Your commercial roof starts with a free inspection, core cuts, and a written, fixed price. There is nothing to pay and nothing to sign to find out what your roof needs.
Wise Builders Roofing and Renovations holds Alabama General Contractor License #60291, is a Duro-Last approved contractor, and brings one project manager, one written scope, and one fixed price to every commercial roof in Mobile and Baldwin County.
Call our Mobile headquarters at (251) 305-7282 or our Foley office at (251) 270-5270, or send the form and we will set a free roof inspection.
Wise Builders Roofing and Renovations, 6215 Rangeline Rd #105, Theodore, AL 36582 and 105 W Camphor Ave #100A, Foley, AL 36535.
"William is great to work with. Wise Builders are extremely thorough and professional. Everything was done exactly how and when they said it would be. A++++"
Nate, Google review, May 2026